Best Shallow Well Pump Reviews and Buying Guide

best shallow well pump reviews

I know how frustrating it can be to search online for the best shallow well pump. There doesn’t seem to be a lot of information specific to them. But right here you’ll be able to read the best shallow well pump reviews. I have also collected a lot of information about shallow pumps, facts that will help you become a more informed buyer.
There are a lot of factors you have to consider. But first, some information on why you’ll need these well pumps. Knowing what they can do just makes it easier to decide what to buy.

Our Pick  For Best Shallow Well Pump

We made a short list of 5 best shallow well pump for you. Let’s take a look at our best pick.

Short Review Of Each Best Shallow Well Pump

Here is the short review of all the best shallow well pump that we selected for you.

1. Flotec FP4012-10 1/2 HP Shallow Well Pump Jet

Flotec FP4012-10 1/2 HP Shallow Well Pump Jet

The Flotec deserves a spot in my list of the best shallow well pump products for performance. It has a powerful motor that raises water from wells 25 feet deep. Capacity wise the Flotec is good for 10 gallons per minute at 40 psi. The nozzle is durable. This is also resistant to the effects of sand in water. Its fiberglass-reinforced thermoplastic provides incredible corrosion and sandy water resistance. Also dust-proof cover protects all electrical components from dust and insects. It Includes stainless steel shaft, heavy duty ball bearings, balanced rotor, mechanical shaft seal and insulated motor windings.

Special Features:

  1. Body Construction: Thermoplastic
  2. Horsepower: 1/2
  3. Maximum Capacity: 8 GPM
  4. Flow at 10′ lift and 40 PSI: 6.4 GPM
  5. Max lift: 25′
  6. Max Pressure: 77 psi
  7. Pressure switch setting: 30/50
  8. Suction pipe size: 1-1/4″ NPT
  9. Discharge pipe size: 1″ NPT
  10. Amp Draw(full load): 9.4 amps
  11. Voltage: 115v/230v, 60 Hz (factory preset to 115v)
  12. Recommended breaker: 15 amp
  13. Maximum water temperature: 140 °F (60 °C)
  14. Measures: 6.0″(W) X 7.0″(H) X 11″(D)
  15. weighs: 26 Pound
  16. 1 year Limited Warranty


  • Corrosion resistant.
  • Easy to use.
  • Motor is insulated.
  • Works great down to depths of 25 feet.
  • Ball bearings are well-designed.


  • One customer complained it isn’t as good as the previous version.
  • Plastic pump makes quite a bit of noise.

Summary of Customer Reviews:

Except for a few negative feedbacks, most people are happy with the Flotec. One of those who bought the pump wrote that it works perfectly. Another one said the Flotec is the ideal replacement for his broken well pump. Another customer posted a review saying it is good value for your money.
A lot of the 4 and 5 star ratings agree the Flotec runs without a hitch. Even long time well pump users say the Flotec does not disappoint. There are a lot of reviews posted from satisfied customers. “Works great”, “just what I needed” and “love it” are often used.

2. WAYNE SWS50 1/2 HP Cast Iron Shallow Well Jet Pump

WAYNE SWS50 1/2 HP Cast Iron Shallow Well Jet Pump

Wayne has manufactured a lot of shallow well pumps, and this SWS50 is among the finest. The unit is well built and should last for years. At ½ HP it’s sufficient for most homes. Setting up the SWS50 is quick too. Once configured, flow rate is steady. I find the handling convenient and the dual voltage is a nice feature.

Special Features:

  1. For wells 0 ft. – 25 ft. in depth
  2. Pressure switch is pre-set at 30-50 psi for automatic operation
  3. Dedicated priming port for volute filling
  4. Durable cast iron volute
  5. Product Weight (lb.): 39 lbs.
  6. Maximum Working Temperature (F): 103
  7. Minimum working temperature (F): 33
  8. Flow rate is 420 gallons per hour (50 psi)
  9. Assembled in the US with foreign and domestic parts.
  10. 3/4 in. Npt discharge with 1-1/4 in. Suction
  11. Dual voltage (120V/240V) high efficiency square flange motor (factory set for 240V)
  12. Self-priming 1/2-horsepower shallow well jet pump
  13. 3 Years Warranty


  • Ideal for household irrigation.
  • Instruction manual is detailed.
  • Easy installation.
  • Runs quietly.
  • Flow rate is good.


  • One reviewer says the motor doesn’t last long.
  • Doesn’t have a low suction switch.

Summary of Customer Reviews:

After going through the best shallow well pump reviews, it’s clear the SWS50 has gotten the approval of most customers. The general consensus is you get a good pump at an affordable price. One of these customers said the pump runs smoothly without problems.
Another reviewer said he uses it for irrigation and there are no problems. A long time user of Wayne well pumps says it’s the best model he has tried. A reviewer posted that he had switched to the Wayne from another product. He also said he’s happy with his decision.

3. Red Lion RJS-100 Premium Cast Iron Shallow Jet Pump

Red lion RJS pump is a heavy-duty best shallow well jet pump, which is designed with a 115/230-volt motor with a capacitor. Its corrosion and rust-resistant cast iron casing ensure years of service and reliability. The pump features 23 GPM flow rate and 50 PSI with automatic shut-off. It is ideal for up to 25 feet in depth shallow. The pump has no writing attached and having an excellent and dependable unit.

Special Features

  • arrow 1 HP SHALLOW WELL JET PUMP: Premium 1-HP jet pump is used for supplying fresh water to large homes, farms, and cabins
  • arrow HEAVY-DUTY CAST IRON CONSTRUCTION: This heavy-duty pump is designed with a 115/230-volt motor with capacitor as well as corrosion and rust-resistant cast iron casing to ensure years of service and reliability
  • arrow GLASS-FILLED THERMOPLASTIC IMPELLER AND DIFFUSER: It has a glass-filled thermoplastic impeller and diffuser for high performance and efficient water flow
  • arrow SHALLOW JET PUMP: Ideal for shallow wells up to 25 feet in depth, the Red Lion RJS-100 1-HP Premium Shallow Well Jet Pump will get the job done
  • arrow 115/230 VOLT HEAVY-DUTY CENTURY MOTOR PUMP: It also features 50 PSI and a 23 GPM flow rate with automatic shut-off, voltage selector for simple connection to existing power sources, a factory pre-set 30/50 pressure switch


  • ​Very easy to wire up and parts are available with a complete overhaul kit.
  • ​It takes like 30 seconds to come to pressure and shut off, and it is nearly silent.
  • ​It’s all cast iron last for a long time.
  • ​Runs quiet and smooth and pumps an excellent volume of water.
  • ​Prevent your expensive pump from burning up due to loss of prime for any reason.
  • Way better pressure and much quieter than the old pump.


  • ​Sometimes it overheats.
  • ​The pressure controller doesn’t always work.

Summary of Customer Reviews:

Red Lion RJS is the best shallow well pump which works excellent. The quality of construction is also high. This is a robust, quiet, and durable replacement. The dual voltage is a nice feature, and it’s nice to have the option to go back to 110 with this pump if needed. It can be installed very easily. The shallow pump is a sturdy, quiet, and well-made cast iron pump. IT runs soft and smooth and pumps an excellent volume of water.
My opinion: This is a heavy-duty, well-made pump. Installation is straight forward. There is a problem pressure switch that hangs up times, but it’s not the fault of the pump.

4. Goulds J5S Shallow Well Jet Pump, 115/230 volt, 1/2 HP

Goulds J5S Shallow Well Jet Pump, 115/230 volt, 1/2 HP

Any way you slice it, the Goulds J5S is one of the best shallow well pump today. It’s basically an install and forget type of pump. Once in place it’s going to pump water regularly. It even has an overheat protection, so it is the complete package. When it comes to performance, the Goulds doesn’t disappoint.

Special Features:

  1. Horsepower: 1/2 HP
  2. Voltage: 115/230 Volts
  3. Phase: 1
  4. Frequency: 60 Hz
  5. Speed: 3500 rpm
  6. Suction Connection: 1-1/4″ NPT
  7. Discharge Connection: 1″ NPT
  8. Flow at 5 ft (30 psi): 16.5 gpm
  9. Flow at 10 ft (30 psi): 14.4 gpm
  10. Flow at 15 ft (30 psi): 12.5 gpm
  11. Flow at 20 ft (30 psi): 10.4 gpm
  12. Flow at 25 ft (30 psi): 8.6 gpm
  13. Maximum Shut Off Pressure: 63 psi
  14. Pump Casing Cast iron
  15. Impeller Material: Glass filled noryl
  16. Thermal Protection: Yes
  17. Maximum Temperatur: 140 degree F
  18. Pump Length: 17-1/4″


  • NEMA standard.
  • Reliable motor.
  • Overload protection.
  • Solid shaft.
  • Runs quietly.
  • Built-in overload with automatic reset.


  • One reviewer said the pressure switch doesn’t last long.
  • Cannot pump 30 ft. rise.

Summary of Customer Reviews:

Most of the positive reviews focus on its performance. Almost all of them agree the Goulds is reliable. One customer in particular said it’s efficient for irrigation and that this is a dependable shallow well pump. One customer wrote that this is the best shallow well pump he’s tried in years.
Other people who bought the well pump say it works just fine. One of them simply said it was great. Another remarked the package arrived on time and works as advertised. More than one customer said it works without any issues. As these reviews show, this is a very good well pump.

5. Red Lion PWJET50 Shallow Well Jet Pump

Red Lion PWJET50 Shallow Well Jet Pump

The best shallow well jet pump reviews have given the Red Lion the thumbs-up, and so will I. The auto shutoff feature works well. The flow rate runs great for pumps up to 25 feet. The Red Lion is also versatile. It’s great for home use, but I can see this being applied in rural locations too.

Special Features:

  1. Includes factory pre-set 30/50 pressure switch that produces up to 50 psi with automatic shut-off
  2. 115/230 Volt TEFC-designed heavy-duty motor connects to existing power source
  3. Item Weight: 23 pounds
  4. Item Size: 13.86 x 8.4 x 8.4 inches
  5. Intake: 1-1/4″ FNPT
  6. Discharge: 1″ FNPT
  7. Volts: 115/230
  8. Amps: 6.6 A @ 115 V and 3.3 A @ 230 V


  • Self-priming pump runs smoothly.
  • Can be used in different environments.
  • Motor designed for heavy duty use.
  • Smooth water flow.
  • Auto shut-off.


  • Instructions not very detailed.
  • Default voltage is set to 230V, not 110V.

Summary of Customer Reviews:

The reviews for the Red Lion are generally favorable. One wrote a short review saying it’s the best. Another reviewer said the Red Lion works as it should. Online, you’re also going to find reviews saying the well pump very efficient.
As the best shallow well jet pump reviews show, the Red Lion is efficient, much more compared to other pumps. Customers often point out the Red Lion works quietly. Most of the feedback speaks highly of its quiet and reliable operation. Based on all the reviews, it’s clear the Red Lion offers good value for your money.

Why You Need a Shallow Well Pump

The best shallow well pump is going to raise water up, and don’t let the word shallow fool you. These pumps can be used to bring up water from depths of up to 20 feet or more, depending on the model.
These pumps are often used in and around homes. However, a shallow well pump can also be utilized in other applications. Some commercial enterprises may find uses for them. There are also some industrial complexes that may find them useful.
Today’s shallow pumps have become more sophisticated. They can now be used for a wide range of applications such as slurry pumping, industrial pumping and general all purpose pumping. These devices can also be relied on for sewage pumping and drainage.
One of the common misconceptions about shallow well pumps is their functionality is limited. However that’s not true. Because they can reach down to 25 feet or so, you can use them for light to medium scale work.
They are not the same league as larger well pumps. But for smaller tasks, these shallow well pumps will get the job done. The more advanced pumps can actually be used for irrigation and during drilling tests.

Advantages of the Shallow Well Pump

  • As the best shallow well pump reviews show, these machines can pump down to 25 feet. You can also adjust the settings for lower depths.
  • These pumps help maintain the water pressure. Properly installed it generates sufficient amounts of psi for optimum performance. Modern well pumps also have more power to keep up the pressure.
  • Shallow well pumps are more widely available and easier to install.
  • These well pumps come with powerful motors for heavy duty use.
  • These well pumps make it easy to move water off wells into your home or building.
  • They’re equipped with pressure boosters. They can increase pressure so your home receives more water.
  • Some of these well pumps can move a thousand gallons per hour.
  • Quality is high and they need little maintenance.
  • Most have safety features built in.
  • Shallow well pumps make it possible to match supply with demand. The really good ones are versatile enough to be used in diverse locations.
  • Shallow well pumps are dependable as construction and design have improved greatly the past few years.

Shallow Well Pump vs Submersible Pump

Shallow Well Pump: Use a shallow well pump if you’ve got a well than is 25 feet or less. While these pumps are not submersible, they’re very effective. There are many options to choose from. Whichever type you choose, it’s going to be set outside the well. These pumps depend on suction power, thereby siphoning the water. These are also known as jet pumps. Power is obtained from the jetting mechanism that increases the pressure and water flow rate. These pumps also have a check valve which keeps water from getting out of the well.

Submersible Pump: Submersible pumps are used in wells at least 90 feet deep. More advanced models can reach several hundred feet down. Instead of siphoning water in, submersible pumps use impellers. Even if water levels vary it doesn’t affect performance. There are different types of submersible pumps, but their function is similar. Not surprisingly, they are more durable than shallow well pumps. Submersible pumps also generate more water. If you have a well a hundred feet or more deep, use a submersible well pump. However they are overkill for a 25 foot well. Since submersible well pumps are in the well, you’ll need to bring them up if there’s damage. Submersible pumps are also more expensive.

Bottom line: unless you’ve got a really deep well, a shallow well pump is the more practical option. They’re more affordable and less difficult to use. These shallow pumps can also last for years.

Things to Consider Before Buying a Shallow Well Pump

The best shallow well pump reviews may give you an idea what to buy. But it’s necessary to make sure it’s right for your well.

  1. Check your well depth. You’ll find the information in the well driller report.
    • For less than 25 feet, a shallow well pump
    • 25 to 110 feet, a deep well pump
    • Anything over 100 feet, a submersible pump
  2. For a four bedroom home, you’ll need a pump that can produce 8 to 12 gallons per minute. To figure out the requirements for your home, count how many water fixtures are present. Assume each fixture is 1 GPM. If there are 7 fixtures, multiply by 60. This method is useful if the pumps you’re looking for uses gallons per hour.
  3. Other factors you have to consider are your water level source, the gallons per minute and vertical lift. The vertical lift refers to how many stories the water is going to be pumped. For an average home, the demand is around 12 GPM. In this case, a ½ HP will do.
  4. There are also other features which you may find useful. Among them are the following:
    • A booster to enhance psi. This is a common feature in shallow well pumps as it keeps water pressure consistent.
    • Overload and thermal protection. This helps prevent motor overheating.
    • A foot valve prevents water from moving back out.
    • If your pump has a pressure tank it’s going to maintain water pressure.

There are other features present in shallow well pumps. But the ones above are the most important. Of course it’s really up to you to decide what features are most vital for your well. Just make sure the pump matches the requirements of your home.

Accessories for Shallow Well Pump

Brands2O TC2104-P2 Well Pump Pressure Gauge

Brands2O TC2104-P2 Well Pump Pressure Gauge

This utility allows you to track the performance of your well pump. The indicators on the unit give you an idea of the PSI level. Its range is from 0 to 100 PSI, and it is easy to install as well. While the gauge works well on shallow water pumps, it is also compatible with submersible pumps too.

Square D by Schneider Electric FSG2J24M4CP 40-60 PSI Pumptrol Water Pressure Switch

Square D by Schneider Electric FSG2J24M4CP 40-60 PSI Pumptrol Water Pressure Switch

This switch gives you control over your well pump’s water pressure. The cutoff pressure is well set. You can also make adjustments to the pressure for precision.

Water Source Llc Rv50-nl 1/2-Inch Pressure Relief Valve No Lead 75 PSI

Water Source Llc Rv50-nl 1/2-Inch Pressure Relief Valve No Lead 75 PSI

A pressure relief valve is a tool you pray you’ll never need. But if the need arises this will do fine. Set at 75 psi, it is easy to configure and handling is straightforward as well. The valve is also built for long term use and doesn’t wear out easily.

WaterWorker HT20HB Horizontal Pressure Well Tank, 20-Gallon Capacity

WaterWorker HT20HB Horizontal Pressure Well Tank, 20-Gallon Capacity

This is another quality tank from WaterWorker. You get polypropylene liner, butyl diaphragm and unique enamel finish for superior strength. It’s hard to emphasize the importance of a good well pump tank, and with this, that’s what you get.

WaterWorker HT-2B In-Line Pressure Well Tank, 2-Gallon Capacity

WaterWorker HT-2B In-Line Pressure Well Tank, 2-Gallon Capacity

This tank is built for heavy duty use. It is constructed from polypropylene so you can use it for extended periods. Also built with butyl diaphragm, it provides greater stability compared to other tanks.

Flotec TC2501LF Well Pump Foot Valve

Flotec TC2501LF Well Pump Foot Valve

The best shallow well jet pump reviews agree this is a valuable tool. It’s very effective for priming pump. With this you’ll get superior flow from your well pump. Constructed from stainless steel, the foot valve is durable too.

Some Common Problems & Troubleshooting

Shallow Well Pump Won’t Turn On: There’s likely a problem with the electrical system. Check the wires linked to the pump. Replace if they’re worn out. Also try turning the circuit breakers on. This will give you a chance to see if there’s a damaged fuse. Replace if that’s the case. If you replaced the fuse and the pump still doesn’t work, make sure the cables are properly installed. Untangle the wires and cables if necessary.

The Motor Won’t Run: A faulty motor makes it impossible for a well pump to run. You should also check the starter switch. If the rest of the motor looks fine, replace the starter switch. Turn the pump off and restart it.

Water Doesn’t Come Out: Check the electric components and motor. If they’re running fine, turn the power supply off. Check for the presence of water in the pipe. If you took off the plug and there’s no water, you have to prime again. Look at the circuit breaker too as it might be burnt out. Replace the circuit breaker.

Clogged Parts: Problems with water delivery could occur if components are blocked. Inspect the strainer, foot valve and the pipe. If they are filled with sand or mud, water won’t be able to come through. Look at the check valve too. If it is damaged, replace immediately.

Environment: Another possible cause is the weather. Cold weather could cause the pipes to freeze. If that happens, you need to call a technician to fix it. If it’s too hot or dry in your area, the water supply might have evaporated already. In this case you need to relocate the well pump.

Refer to the Manual: Your manual should have a troubleshooting guide. Read it and follow the instructions.

Maintenance Tips

  • The best shallow well pump works when used accordingly. Do not use the pump for a well it is not designed for.
  • Inspect the well pump on a regular basis. If it doesn’t have an overheat protection, make certain the pump doesn’t exceed its capacity.
  • Make sure your well is clean and suitable for a well pump.
  • Do a water flow test to determine its performance. The output must be within range of the product specifications. If it’s not, there is a problem with one of the components.
  • Test the water content in your well periodically for signs of bacteria and other contaminants.

Frequently Asked Questions

1. Why is there no water coming out?
Answer: Make sure the circuit breaker has enough power. Look at the pressure gauge too if there is enough pressure.

2. Should I install my pump in the well?
Answer: A shallow well pump is not installed in the well. It is set outside the well. Your manual has the instructions.

3. Are these pumps durable?
Answer: The good ones last for 10 years. Its longevity also depends on how properly maintained it is.

4. There is no water. Is my pump damaged?
Answer: It is possible. But it could also be due to defects in the well pump. Turn the pump off and look for signs of electrical or mechanical problems.

5. What should I do if there’s a leak on my well pump?
Answer: Replace the well pump as soon as possible. Severe leaks are hard to fix and best replaced.

For Those Of You Who Are Still Unsure

I recommend the Flotec FP4012-10 1/2 HP Shallow Well Pump Jet and the WAYNE SWS50 1/2 HP Cast Iron Shallow Well Jet Pump. The Wayne Jet Pump has excellent flow rate and construction is solid. I also like its dual voltage feature and automated functions.
The Flotec also gets my vote as one of the best shallow well pump available. Its design is ideal for shallow wells and the built is solid. This is also one of the most resistant when it comes to durability. For that, it’s worth the money.
I’ve seen a lot of these shallow well pumps, and these two are among the best. They’re really effective and perform like they’re supposed to.

Final Word

There are few things more important for your household than water. With a well-made pump, you’ll have access to clean water. In many cases you’ll only be able to gain this with a well pump. With the glut of products online, it can be downright confusing, but with these tips and reviews hopefully that won’t happen to you.
All manufacturers claim to have the best shallow well pump, but only a thorough review will do. I have a lot of experience working with pumps, so I know what works and what doesn’t, so the information above should be useful to you. Good luck!


Please enter your comment!
Please enter your name here

This site uses Akismet to reduce spam. Learn how your comment data is processed.